CD15 Prisma Compact Disc Player User Guide

  • Contents

    • Getting started

    1 Unpack the CD15 Prisma

    Your CD15 Prisma is supplied with:

    • The Chromecast built-in Quick Start Guide
    • Mains cable
    • IR cable
    • Trigger cable
    • Antennae for Bluetooth and Wi-Fi
    • C25 remote control with batteries
    • AC Polarity Pen

    If any of these items are missing please contact your supplier. We recommend you retain the packaging in case you need to transport the unit at a later date.

    Note that the CD15 is supplied with a protective film on the display glass. Remove the film for a clearer whiter display.

    2 Connect to an amplifier

    Analogue outputs

    The CD15 provides an unbalanced RCA analogue output  for connecting to an appropriate stereo amplifier or preamplifier.

    Digital outputs

    Alternatively the CD15 Compact Disc Player provides one coax digital output and one optical digital output for connection to a digital preamplifier or digital surround processor.

    • Connect the appropriate output to your preamplifier or surround processor using a suitable cable.

      3 Connect a USB flash drive

      You can optionally connect a USB flash drive or USB hard drive to the USB-A input to play audio files from the drive. For more information see Playing music from a drive or music server.

      4 Connect the antennae and Ethernet cable

      • Connect the two antennae supplied with the CD15 Prisma to the ANT 1 and ANT 2 sockets on the back panel, and position the two antennae at a slight angle from the vertical. The antennas are used for Bluetooth and Wi-Fi connectivity.
      • For best results we recommend connecting the CD15 Prisma to the network using an Ethernet cable. Connect the cable between your router or switch and the LAN port on the back panel of the CD15 Prisma.

      5 Connect power

      • Plug one end of the mains cable supplied with the CD15 into the power connector on the back panel, and connect the other end to a wall socket.

      If this cable is not suitable for your power outlets please contact your supplier for an alternative cable.

      Note: See Phase for information about getting the best sound from your CD15.

      WARNING: Always disconnect the CD15 from the mains power before connecting or disconnecting any cables.

      • Switch on the CD15, using the switch on the back panel. 

      To switch on from standby

      • Press the  button on the front panel or remote control.

      The display shows:

      6 Connect to a network

      The first time you start up the CD15 Prisma you will be prompted to specify how you want to connect to the network:

      For best results we recommend connecting via cable.

      Connecting via an Ethernet cable

      To connect via an Ethernet cable select Cable.

      • Connect an Ethernet cable between your router or switch and the LAN port on the back panel of the CD15.

      Using Ethernet cable connection provides immediate access to your network and the OLED display will show “LAN” in its lower right corner to indicate that a connection is established.
      If the OLED display will show “Setup mode”, make sure your Ethernet cable is connected and it has a network connection.

      To take advantage of Chromecast built-in related features and functionality – such as casting, voice control, and multi-room/multi-zone configuration and control – configuration must be done through Google Home app, with a Google account.

      • Install the free Google Home app on your mobile device.
      • Open the Google Home app and follow the instructions for setting up the CD15 Prisma on your network in the Chromecast Built-in Quick Start Guide, or the brief description below.
      • Enable Bluetooth and Wi-Fi on your mobile device.
      • The Google Home app will display Set up CD15 Prisma.
      • Click SET UP and follow the instructions.
      • The OLED display will show:

        and a test tone will be played and you will be prompted to select a name for your CD15 Prisma.
        If you cannot hear the test sound you may need to increase the volume on your amplifier.
      • Enter an appropriate name.

      Once you have configured the CD15 Prisma using the Google Home app the “Configure network” message in the OLED display will disappear.

      You will now be able to cast music to your CD15 Prisma.

      To disconnect from the Ethernet network

      • Remove the Ethernet cable.

      Connecting via Wi-Fi

      When the CD15 Prisma is ready to be set up to your Wi-Fi, the OLED display will show:


      You can connect to Wi-Fi either by using iOS AirPlay speaker setup, Prisma Android app or Google Home app.

      Please note, to take advantage of Chromecast built-in related features and functionality – such as casting, voice control, and multi-room/multi-zone configuration and control – set up and configuration must be done through Google Home, with a Google account.

      AirPlay speaker setup

      Go to the Wi-Fi menu under Settings on your iOS device. Select the Prisma model you wish to setup under “SET UP NEW AIRPLAY SPEAKER…” at the bottom of the list. Select the Wi-Fi you want your CD15 Prisma to connect to and select “Next”. Follow the instructions on the screen to complete setup.

      Prisma Android app

      Open the Android Prisma app and following the instructions found at the link in the discovery page.

      Google Home app

      • Make sure Bluetooth and Wi-Fi are enabled on your mobile device.
      • Install the free Google Home app on your mobile device.
      • Open the Google Home app and follow the instructions for setting up the CD15 Prisma on your network in the Chromecast Built-in Quick Start Guide, or the brief description below.
      • Run Google Home.

      The Google Home app will display Set up CD15 Prisma.

      • Click SET UP and follow the instructions.
      • The OLED display will show:

        and a test tone will be played and you will be prompted to select a name for your CD15 Prisma.
        If you cannot hear the test sound you may need to increase the volume on your amplifier.
      • Enter an appropriate name.
      • Select the Wi-Fi network your CD15 Prisma should connect to.

        Once you have configured the CD15 Prisma using the Google Home app the “Configure network” message in the OLED display will disappear.

        You will now be able to cast music to your CD15 Prisma.

        To disconnect from the Wi-Fi network

        Either:

        • Select Wi-Fi settings for the CD15 Prisma in the Google Home app.
        • Select Forget this network.

        Or:

        7 Download the Prisma app

        To view and change the CD15 Prisma settings you need the Primare Prisma app, which is available for free download on iOS devices from the Apple App Store and on Android devices from the Google Play Store.

        In either case search for Primare Prisma to find the app.

        8 Play a CD

        • Insert the CD into the slot with the label facing upwards.
        • Press the  button on the front panel, or the  button on the remote control, to start playing the disc.

        For more information about playing a CD see Using the CD15.

         

        Printing or saving as PDF

        You can print an on-line Primare user guide from your web browser, to provide you with a permanent copy to refer to away from your computer.

        Alternatively, you can save a user guide as PDF files, to refer to when are you not connected to the internet.

        To do so, simply choose Print, or Print followed by Save as PDF, from your browser’s File menu.

        For the specific procedure for each of the most popular web browsers see How do I print or save a PDF copy of the on-user guides?.

        Translate

        You can use Google Translate to translate the contents of the Primare website. To do that, select the language you would like to translate into in the list below.

        Please bear in mind, since the Google Translate is an automatically generated translation, we do not take any responsibility for errors in the text.