Allt-i-Ett User Guide

The CE symbol indicates that this Primare product complies with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

The WEEE symbol indicates this Primare product complies with the European Parliament and Council Directive 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE). This product must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.

The RoHS symbol indicates that Primare products are designed and manufactured to comply with the Restriction of Hazardous Substances (RoHS) as stated in the European Parliament and Council Directive 2002/95/EC.

Copyright and acknowledgments

Copyright © 2025 Primare AB.
All  rights reserved.

Primare AB
Limstensgatan 7
21616 Limhamn
Sweden

https://primare.net

Issue: Allt-i-Ett (6th December 2025)

The information in this guide is believed to be correct as of the date of publication. However, our policy is one of continuous development and so the information is subject to change without notice, and does not represent a commitment on the part of Primare AB.

Primare is a trademark of Primare AB.

This guide was produced by
Human-Computer Interface Ltd.
http://www.interface.co.uk

Congratulations on selecting your new Allt-i-Ett

This user guide describes the features and explains how to set up the Allt-i-Ett for the best sound quality and ease of operation in order to allow for the most enjoyable reproduction of sound from all your sources.

The Allt-i-Ett includes stereo power amplifiers, and no fewer than six front-facing loudspeakers and two rear-facing loudspeakers, for room-filling immersive sound.

The Allt-i-Ett gives you superb sound from your TV and other video sources via the latest eARC connection, as well as from your other analogue and digital sources, and streaming sources. It also includes a built-in DAB+ and FM radio.

What is eARC?

eARC stands for Enhanced Audio Return Channel. It’s an enhanced version of ARC that lets you connect high quality sound systems like the Allt-i-Ett to a TV via a standard HDMI cable.

Most TVs provide two or three HDMI sockets to allow you to send video to the TV from a device such as a set-top box, games console, or Blu-ray player. On a TV with ARC an additional HDMI socket marked ARC or eARC allows you to send digital audio from the TV to a sound system like the Allt-i-Ett; it’s called a return channel because, unlike the video channels, it’s going from the TV to the external device.

So to get superb sound from your TV all you need to do is connect the TV’s eARC HDMI socket to the Allt-i-Ett’s eARC socket with an HDMI cable. If your TV only supports ARC you’ll still get the superb sound, but without the enhancements of eARC.

CEC

Both eARC and ARC also provide CEC (Consumer Electronics Control), that allows the TV to control the Allt-i-Ett volume, and bring it out of standby. You can choose which of these options you want in the Allt-i-Ett HDMI CEC settings.

Alternatives

Finally, if your TV doesn’t support eARC or ARC you can still get superb TV sound from the Allt-i-Ett by connecting the TV’s audio output to the Allt-i-Ett via a digital optical cable.

For additional support and assistance please contact your local authorized Primare dealer, or visit our website at www.primare.net.

*“allt i ett“ means “all in one” in Danish, Norwegian, and Swedish

The following diagram explains the function of each of the connectors on the Allt-i-Ett back panel:

* Use the polarity pen to check; see Additional information – Phase.

SERVICE: For dealer use only.

ANT FM.DAB+: Connect the supplied telescopic antenna for FM and DAB+ reception.

LAN IN: Use an RJ45 Ethernet cable to connect the Allt-i-Ett to a LAN router for Ethernet connectivity.

LAN OUT: An optional output to allow you to daisy-chain the Ethernet connection to another device.

USB: Allows you to connect a USB cable terminated in a USB-A connector, play music files on a hard drive or USB stick.

D2, D3: Optical digital inputs.

D4: Coax digital input.

eARC: To connect to an HDMI device that provides audio over an eARC HDMI cable.

TRIG OUT: A trigger output to switch on a connected device when the Allt-i-Ett is switched on.

IR OUT: Allows you to relay the infra-red PRISMA remote signals to Primare products in a closet, or out of reach of the infra-red signal.

SUB OUT: To connect to an active subwoofer, to extend the bass available from the Allt-i-Ett.

A1/PHONO: An analogue input, for a line-level source or a Moving Magnet phono cartridge.

GND: A ground connection for low noise on a phono output.

O/I: The main On/Off switch. This will normally be left on, and the Allt-i-Ett put into standby by the touch control on the touch panel.

Power: The mains power connection.

Fitting the batteries

The PRISMA remote is powered by two LR03 batteries, also known as AAA batteries. Before using the remote you need to fit the two batteries supplied with the remote.

• Press slightly on the top of the battery compartment on the back of the remote:

• Slide the back cover parallel to the case towards the bottom of the remote and remove it:

Do not attempt to use a metal object to open the cover, as you may scratch the case.

• Insert the two batteries, observing the correct polarity indicated by the ‘+’ signs on the inside of each battery holder:

• Replace the back cover by sliding it towards the middle of the remote, until it clicks into place.

The batteries should last for about a year with normal use.

General features

The following features are available for any product you are controlling.

For details of the individual functions available for each product refer to the Prisma Remote diagram for that product; see Prisma Remote Product Support.

Backlight

The PRISMA remote has a backlight, to allow you to see the keys in a dimly lit or dark room.

To turn on the backlight:

• Press the LIGHT button.

The light will stay on until no key has been pressed for ten seconds.

Long press

To select most functions you simply press the appropriate key.

Some alternate functions are available by a long press on a key of about half a second.

Putting products to standby

Pressing the STANDBY button puts the product you are currently controlling to standby, or turns it on from standby.

Giving a long press on the STANDBY button puts all controlled products to standby, including the TV.

Entering numbers

To enter a single digit number, such as an input number on a preamplifier, or a track number on a CD, you simply press the appropriate number key.

Entering two-digit numbers

If you need to enter a two-digit number, on most products you can do this as follows:

• Long press on a digit key to enter the first digit.
• Press a digit key to enter the second digit.

Allt-i-Ett displays and controls

You interact with the Allt-i-Ett using the three display panels on the top of the unit:

Information Display

The Information Display is a tilted display that shows information about the Allt-i-Ett. The display is motorised, and you can adjust its angle from the PRISMA remote or the SETTINGS menu to suit how you prefer to view it.

Note: Do not attempt to move the Information Display by hand or you may damage it.

Touch Control

The Touch Control is a touch-sensitive display that displays controls relevant to the function the Allt-i-Ett is currently performing, and allows you to select them.

It also displays the SETTINGS menu, to allow you to configure the operation of the Allt-i-Ett. For more information see Configuring the settings.

Main Controls

The Main Controls are the volume control, and four touch buttons:

Volume control: Rotate to change the volume.

Standby: wakes the Allt-i-Ett up from standby, or puts it into standby.

 Back: Returns to the SOURCE screen.

 Settings: Displays the SETTINGS menus to allow you to configure the Allt-i-Ett.

Mute: Mutes or unmutes the sound (to the MUTE VOLUME as defined in SETTINGS).

Changing the volume

By default the Allt-i-Ett allows you to vary the volume from 0 (silence) to 65 (maximum volume). You can change the maximum volume in the AUDIO SETTINGS menu.

To change the volume

• Rotate the volume control on the Main Controls, or press the + or – buttons on the PRISMA remote.

The current volume setting is shown on the Information Display.

Selecting an input

The Allt-i-Ett provides a choice of seven inputs. Initially these are labelled as shown in the following table, but you can give them your own aliases to suit the sources in your system; see Configuring the settings – Alias.

Label	Description
A1	Analogue on RCA connectors.
D2, D3	Digital optical on TOS connectors.
D4	Digital coax on an RCA connector.
eARC	TV sound on an HDMI eARC cable.
DAB	DAB radio using the antenna.
FM	FM radio using the antenna.

Automatically selecting an input

For most inputs you don’t need to explicitly select the input, because the A1 and D2 to D4 inputs and streaming options provide AUTO-SENSE, which will automatically bring the Allt-i-Ett out of standby and select the input if audio starts playing on it.

For the A1 and D2 to D4 inputs you can choose whether this option is active using the AUTO-SENSE option on the input’s menu on the INPUT SETTINGS menu.

The eARC input provides CEC, which can select the eARC input when the TV is turned on. You can choose whether this is active using the FOLLOW SOURCE SWITCH option on the eARC option on the INPUT SETTINGS menu.

To select an input

Either:

• Touch the input icon on the SOURCE screen on the Touch Control:

You can drag the display left or right to bring all the sources into view.

Or:

• Press the or buttons on the PRISMA remote to step between sources on the Information Display.
• Press SELECT on the PRISMA remote when the one you want is displayed.

Note that if you have set the STATUS of an input to DISABLED it will not be included in the list.

Adjusting the displays

To change the display brightness

• Press the DIM button on the PRISMA remote to step through the two display brightness levels, and off.

If you turn the display off it will be restored briefly when you operate any control.

To adjust the position of the Information Display

• Press the  button on the PRISMA remote to raise the display or the  button to lower it.

By default when the Allt-i-Ett comes on from standby the Information Display will return to vertical; you can change this with the DISPLAY MODE option on the GENERAL SETTINGS menu.

Using presets

Presets provide a convenient way of saving your favourite FM or DAB radio stations, Internet radio stations, or Spotify playlists. You can store up to six presets, numbered 1 to 6.

Presets you have saved will be shown with a white border on the SOURCE screen:

To select a preset

Either:

• Touch the preset on the SOURCE screen, or the DAB or FM screen.

Or:

• Press one of the buttons 1 to 6 on the PRISMA remote. This will wake the Allt-i-Ett from standby if it is not already on.

To save a preset

• While listening to the source you want to save, long press on the button corresponding to the preset you want to use.

You will be prompted to confirm:

• Touch OK to proceed.

The preset will be displayed solid white to show that it has stored the source.

To replace or delete a preset

• Long press on the button corresponding to the preset you want to replace or delete.

You will be prompted to confirm:

• Touch Replace to replace the preset with the source you are listening to, or Delete to delete the preset.

Connecting headphones

The Allt-i-Ett allow you to listen to music either through wired headphones, terminated in a standard 3.5mm mini jack plug, or through wireless Bluetooth headphones.

When you connect headphones the sound through the Allt-i-Ett speakers is automatically muted.

To connect wired headphones

• Plug them into the socket on the right side of the Allt-i-Ett case, between the loudspeaker baffle and the side panel.

To connect Bluetooth headphones

• Set BLUETOOTH MODE to TRANSMITTER in the Allt-i-Ett BLUETOOTH SETTINGS; see Configuring the settings – Bluetooth settings

Four additional options then become available:

BLUETOOTH DEFAULT VOLUME and BLUETOOTH MAXIMUM VOLUME set the default and maximum volume when using Bluetooth headphones.

• Touch ADD NEW DEVICES to pair with the Bluetooth headphones. After a delay a list of available devices will be shown:

• Touch the one you want to connect to.

The BLUETOOTH MODE screen will then show the paired device under the heading PAIRED DEVICES:

The audio from the Allt-i-Ett will now play through the headphones.

To disconnect paired Bluetooth headphones

• Touch the device in the PAIRED DEVICES list.
• Choose Disconnect Device to end the connection but keep the headphones in your Bluetooth list, or Forget Device to end the connection and clear all information about the headphones.

Click to display a larger version.

These methods of playing music from the Allt-i-Ett involve connecting the source to the Allt-i-Ett via a cable, and don’t require Wi-Fi, Ethernet, or Bluetooth.

The Allt-i-Ett also includes built-in DAB+ and FM radios, to allow you to listen to radio stations, and save your favourite stations as presets.

Listening to direct sources

To connect a digital or analogue source

• Connect the source via a suitable cable:

Source	Cable
Analogue	Phono RCA cable
Digital optical	Digital optical cable
Digital	Digital coax cable

To connect a TV

You can connect a TV to the Allt-i-Ett to get superb TV sound.

• Connect the TV’s eARC/ARC HDMI output to the eARC input on the Allt-i-Ett.

If the TV doesn’t have an eARC or ARC output:

• Connect the TV’s optical digital output to the D1 or D2 input on the Allt-i-Ett.

To connect a phono turntable

You can connect a phono turntable to the Allt-i-Ett, to play vinyl records:

• For lowest noise connect the cable screening to the GND terminal on the back panel.
• In the INPUT SETTINGS menu select the A1 input and set the A1 OR PHONO option to PHONO.

The PHONO option is compatible with Moving Magnet phono cartridges.

To play music from a source

Either:

• Select the source from the Touch Control.

Or:

• Press the or buttons on the remote control to step between sources on the Information Display, and press SELECT when the one you want is displayed.

If you have a phone or tablet on the same Wi-Fi network as the Allt-i-Ett you can also use the Primare PRISMA app to select and control sources.

Listening to DAB+ or FM radio stations

To select a DAB+ station

• Touch the DAB input on the Touch Control.

The available DAB stations will be shown:

• If necessary drag the station icons left or right to find the one you want.
• Touch the station icon to select it.

To select an FM station

• Touch the FM input on the Touch Control.

The FM tuning control will be shown:

Either:

• Touch > or < to move up or down in frequency in small steps.

Or:

• Touch >> or << to scan up or down in frequency to the next station.

Or:

• Drag the frequency scale left or right to fine tune.

To save a DAB+ or FM station as a preset

• While the station is playing, long-touch on one of the six preset circles on the Touch Control.

• The preset will be solid white to show that it has stored the station.
• Presets that are storing other stations will be shown with a white border.

Click to display a larger version.

You can play audio files from a USB flash drive, external USB hard disk, or a network drive. These options are ideal if you already have a digital library of music files or digitised CDs.

The music files on a USB flash drive or hard disk will be classified using the metadata in the files, so you can browse them under a range of different headings.

On a NAS drive you have the option of running a media server program, which will catalogue your music library and give you the option of organising it in different ways; eg by Artist, Genre, Album, or Composer. One free option is MinimServer; see http://minimserver.com/.

To play audio files from a USB flash drive or hard drive

• Connect the USB drive to the USB-A input on the Allt-i-Ett. 

The USB drive can contain folders and music files in any of the popular formats; see Technical specification for details.

• Use the Primare PRISMA app to connect to the Allt-i-Ett.
• Select USB on the SOURCE tab.

You can then browse the files on the USB drive under the headings: Artist, Album, All tracks, Composer, Folders, and Genre:

• Pause, play, step between tracks, or adjust the volume from the Primare PRISMA app, or from the Touch Control.

To play audio files from a NAS (network) drive

• Connect the NAS drive to the same network as the Allt-i-Ett.

The NAS drive can either contain folders and music files in any of the popular formats, or it can run a music server. See Technical specification for details of the supported file formats.

• Use the Primare PRISMA app to browse, play, and control the music.

Alternatively you can select and play music from a Mac or PC using a music server program such as JRiver or Foobar2000.

Click to display a larger version.

You can stream music playing on your phone, tablet, or computer to the Allt-i-Ett using Bluetooth or AirPlay (iOS only); the sound from any apps on your device will be played through the Allt-i-Ett, including the Spotify, Qobuz, and TIDAL music streaming apps.

The Spotify, Qobuz, and TIDAL apps also provide a more convenient way of streaming music to the Allt-i-Ett using Spotify Connect, Qobuz Connect, or TIDAL Connect. These give better audio quality and less phone battery drain by streaming direct from the music service to the Allt-i-Ett; your phone just acts as the controller.

You can also stream Internet radio stations from the Primare PRISMA app direct to the Allt-i-Ett. You don’t need a subscription for this.

Although you can stream music over Wi-Fi, for best results connect the Allt-i-Ett to your home router via an Ethernet cable.

Controlling the music you’re streaming

When you’re streaming music to the Allt-i-Ett, track information and cover art is displayed on the Information Display:

To control the volume

Either:

• Use the volume control on the Allt-i-Ett Main Controls, or the + and – buttons on the Primare PRISMA remote.

Or:

• Use the volume controls on the music app.

Or:

• Use the volume controls on the playing screen in the Primare PRISMA App.

To step between tracks

Either:

• Use the or buttons on the Primare PRISMA remote.

Or:

• Use the controls on the Spotify, Qobuz, or TIDAL app.

Or:

• Use the controls on the Spotify, Qobuz, or TIDAL playing screen in the Primare PRISMA app.

Streaming using AirPlay

Use AirPlay to send audio over the network from an Apple device to the Allt-i-Ett.

To stream via AirPlay

• On your Apple device select the Allt-i-Ett as the output device:

Streaming using Bluetooth

Use Bluetooth to send audio directly to the Allt-i-Ett from your Bluetooth device using the Bluetooth connection. You don’t need a network to stream using Bluetooth.

To stream via Bluetooth

• Connect to the Allt-i-Ett in the Bluetooth settings on your phone, tablet, or computer.

If you’re not able to connect, check that BLUETOOTH MODE is set to RECEIVER in the Allt-i-Ett BLUETOOTH SETTINGS; see Configuring the settings – Bluetooth settings.

• In your music app select the Allt-i-Ett as the output device.

Streaming using Spotify Connect

Spotify Connect lets you stream music directly to the Allt-i-Ett from the Spotify music service over your network.

Use your phone, tablet or computer as a remote control for Spotify. Go to https://spotify.com/connect to learn how.

To set up Spotify Connect

• Click the devices icon on the Spotify playing screen.

The Spotify app will display a Go to Settings button to allow you to give Spotify network access:

• On the Spotify page in Settings turn on the option Local Network:

To stream via Spotify Connect

• Click the devices icon on the Spotify playing screen and select the ALLT-i-ETT as the output device.
• Use your phone, tablet, or computer as a remote control for Spotify.

To save a Spotify playlist as a preset

• Long press on the button corresponding to the preset you want to use.

For more information see Using the Allt-i-Ett – Using presets.

The Spotify Software is subject to third party licenses found here:

https://www.spotify.com/connect/third-party-licenses

Streaming using TIDAL Connect

If you have a TIDAL subscription you can stream music directly to the Allt-i-Ett from the TIDAL music service over your network, using the TIDAL app on your phone, tablet, or computer as a controller.

To set up TIDAL Connect

• In the Settings on your phone or computer, turn on the option to allow TIDAL to access your Local Network:

To stream via TIDAL connect

• Click the devices icon on the TIDAL playing screen, and select the ALLT-i-ETT from the list of devices:

• Use your phone, tablet, or computer as a remote control for TIDAL.

Streaming using Qobuz Connect

If you have a Qobuz subscription you can use Qobuz Connect to stream music directly to the Allt-i-Ett from the Qobuz music service over your network, using the Qobuz app on your phone, tablet, or computer as a controller.

To set up Qobuz Connect

• In the Settings on your phone or computer, turn on the option to allow Qobuz to access your Local Network:

To stream via Qobuz Connect

• Click the devices icon on the Qobuz playing screen, and select the ALLT-i-ETT under the Select a device as an audio output heading:

• Use your phone, tablet, or computer as a remote control for Qobuz.

Streaming Internet radio

You can stream a wide range of Internet radio stations from the Primare PRISMA app direct to the ALLT-i-ETT.

• Touch the Radio icon on the SOURCE tab.

A list of categories is displayed:

• Either browse for stations in these categories, or click the search icon and type all or part of the name of the station you are looking for.

The STATION information page is displayed:

• Click a link in the STREAMS list to play the Internet radio station.

To save an Internet radio station as a preset

• Long press on the button corresponding to the preset you want to use.

For more information see Using the Allt-i-Ett – Using presets.

Introduction

The Allt-i-Ett provides Room EQ (equalisation) using functions included in the Primare PRISMA app. The EQ function can be used with any iOS or Android mobile device; iOS devices can use their own built-in microphone, but Android devices require the use of the Zen microphone described below.

Room EQ

Room EQ automatically creates an equalisation profile for the listening room. It uses a one minute measurement sequence during which pink noise is played through the Allt-i-Ett while you move a microphone around the room in large circular motions. The EQ function then calculates an appropriate equalisation profile to compensate for the room characteristics, and applies it to the Allt-i-Ett.

Since the room impacts the lower frequencies the most, the compensation will correct the bass range below 500Hz. However, full frequency data is captured during the measurement process so that the low-frequency output is aligned with the high-frequency output, providing a naturally even response within the room at the listening position.

The Room EQ function can use the iOS microphone on iOS devices, or a Zen Wireless microphone, available separately, on both Android or iOS devices.

Zen Wireless Microphone

The Zen Wireless Microphone is a rechargeable battery powered microphone, making it an ideal calibration tool for collecting room acoustic data when using an Android mobile device. It can also optionally be used with an iOS device.

See Zen Wireless Microphone user guide at this link.

Room EQ

To select Room EQ in the Primare PRISMA App:

• Select the SETTINGS panel.
• Expand the Audio settings section of the menu.
• Select the Room EQ option.

The Room EQ screen is displayed:

• Touch the Room EQ icon, read the instructions, and click Got it!.

The following page allows you to specify the roll-off frequency of your loudspeakers, from 20Hz to 200Hz:

As a guide, enter 35Hz for the Allt-i-Ett or if you have an external subwoofer find its natural roll-off in the subwoofers technical specification.

• Touch the tick button to continue.

The next page allows you to start the Room EQ measurement.

• Touch the Begin button to continue.

Any audio you were listening to will be muted, and pink noise will be played through the Allt-i-Ett.

The progress is shown by a bar around the button:

• Stand 1.5 meters or more away from the Allt-i-Ett.
• Do not get in between the phone/microphone and the Allt-i-Ett.
• Move around the entire room.

The process will take up to 60 seconds but can be stopped after 30 if the entire room has been covered.

When the measurement has finished the measured room characteristic is displayed as a red curve:

• Touch the Calibrate button.

The corrected room EQ will be calculated and shown as a green curve on the response graph:

• Touch Enable.

The correction is automatically applied to the Allt-i-Ett.

The added Room EQ can be changed at any time by clicking the Redo button. For example, if you have moved the Allt-i-Ett to a different room, or changed the furnishings in your room, you should recalculate the Room EQ profile.

To activate or deactivate the Room EQ

Either:

• Press the radio button under the Room EQ icon on the main EQ screen in the Primare PRISMA app.

Or:

• Display the SETTINGS menu on the Allt-i-Ett, and change the ROOMEQ item on the SOUND SETTINGS menu to DISABLED.

You can view and change the Allt-i-Ett settings on the Touch Control, or from the SETTINGS tab on the Primare PRISMA App.

Using the SETTINGS menus on the Allt-i-Ett

To display the SETTINGS menus

• Touch the icon on the Main Controls.

The main SETTINGS menu is displayed on the Touch Control:

The following main menus are available:

Menu	Description
SOUND SETTINGS	Allows you to configure the equalizer, RoomEQ, Bacch, and Allt-i-Ett placement.
STREAMING SETTINGS	Allows you to set up Bluetooth and AirPlay.
AUDIO SETTINGS	Allows you to customise the start-up volume, maximum volume, mute volume, and subwoofer output.
INPUT SETTINGS	Allows you to customise the inputs to suit the sources in your system.
GENERAL SETTINGS	Allows you to configure the general features of the Allt-i-Ett, and restart or reset the Allt-i-Ett.
WIFI SET-UP	Allows you to configure the Wi-Fi connection.
INFO	Displays information about the software on your Allt-i-Ett.

To show the options on a menu

• Touch a menu title on the Touch Control to expand it and show the options on the menu.

You can drag the Touch Control up or down to view further items, if necessary.

To edit a menu option

• Touch the menu option to edit it.

Help text about the item is shown on the Information Display.

To enter text

Some menu options, such as ALIAS, display a touch keyboard to allow you to edit text:

• Touch ?123 to switch to a keyboard with numbers and symbols.
• Touch to switch to upper case.
• Touch to delete.
• Touch or DONE to exit from the keyboard with the text you have entered.

To enable or disable an option

Some menu options have a slider to allow you to enable or disable the option:

• Drag the slider to the right to enable the option, or to the left to disable it.

To adjust a level

Some menu options allow you to adjust the level of the setting:

• Drag the circle to the right to increase the level, or to the left to decrease the level.

The precise level is shown below the control.

To go back to the previous menu

• Touch the name of the previous menu at the top of the menu; for example < INPUT SETTINGS.

To exit from the settings menus

• Touch the icon on the Main Controls.

Using the SETTINGS menus on the PRIMARE App

• Select the Allt-i-Ett on the PRIMARE App Select device to use screen.
• Select the SETTINGS tab:

• View or change the settings as described for the Touch Control menus below.

SOUND SETTINGS menu

The SOUND SETTINGS menu allows you to configure the equalizer, RoomEQ, Bacch, and Allt-i-Ett placement.

EQUALIZER

Allows you to define a frequency profile to boost or attenuate specific frequency bands, from bass to treble frequencies going from left to right.

By default the frequency profile is flat. Drag a slider up to boost the frequency band by up to 6dB, and down to attenuate the frequency band by up to -6dB.

ROOMEQ

RoomEQ optimises the sound processing of the Allt-i-Ett to match the characteristics of your room.

To set up RoomEQ

• Run the PRISMA app.
• Select the SETTINGS tab.
• Select Audio settings.
• Select Room EQ.
• Follow the on-screen instructions.

For more information see Room EQ.

Warning: This plays loud white noise through the Allt-i-Ett loudspeakers.

When you have completed the RoomEQ sequence the menu option will show Enabled.

BACCH

Allows you to enable BACCH spatial audio, to give a more spacious sound with the Allt-i-Ett.

PLACEMENT

Allows you to specify how your Allt-i-Ett is positioned, for optimum sound processing:

• Choose FREE STANDING (the default) if there is space all around the Allt-i-Ett, WALL STANDING if it is against a wall, or CORNER STANDING if it is positioned between two walls in a corner.

STREAMING SETTINGS menu

The STREAMING SETTINGS menu allows you to set up Bluetooth or AirPlay:

BLUETOOTH SETTINGS

Displays the BLUETOOTH SETTINGS submenu:

BLUETOOTH MODE: Set to TRANSMITTER to connect the Allt-i-Ett via Bluetooth to a pair of Bluetooth headphones, RECEIVER (the default) to play music to the Allt-i-Ett, or OFF to disable Bluetooth.

For more information about connecting Bluetooth headphones see: Using the Allt-i-Ett – Connecting headphones.

AUTO-CONNECT: set to ENABLED to automatically reconnect to a paired mobile Bluetooth device when the Bluetooth input on the Allt-i-Ett is selected, or DISABLED (default) to disable automatic connection.

AUDIO SETTINGS menu

The AUDIO SETTINGS menu allows you to customise the start-up volume, maximum volume, mute volume, and subwoofer output:

DEFAULT VOLUME

Displays a DEFAULT VOLUME submenu to allow you to specify the initial volume when you bring the Allt-i-Ett out of standby; it can be between 0 and 60. The default is 20.

MAXIMUM VOLUME

Sets the maximum volume limit between 0 and 99. The default is 65.

MUTE VOLUME

Sets the volume when the Allt-i-Ett is muted. You can choose between 0 (default) and 30.

SUBWOOFER OUTPUT

Allows you to configure the subwoofer output:

SUBWOOFER OUTPUT: Set this to ENABLED to use a subwoofer connected to the SUB OUT output.

SUB GAIN: Allows you to set the subwoofer gain, from -12dB (quieter) to 12dB (louder), where 0dB is the default setting.

SUB FREQ: Allows you to set the crossover frequency for the subwoofer, from 10Hz to 150Hz, where 40Hz is the default setting.

INPUT SETTINGS menu

The INPUT SETTINGS menu allows you to customise the inputs to suit the sources in your system.

The options will depend on the type of input.

All inputs provide the options ALIAS, STATUS, and INPUT GAIN:

ALIAS

Displays a touch keyboard to allow you to give the input a name of up to six characters.

STATUS

Allows you to set the input to ENABLED or DISABLED. Disabled inputs won’t appear in the list of inputs on the Touch Control, or when you press the or buttons on the remote control to step between inputs on the Information Display.

INPUT GAIN

Displays a slider to allow you to adjust the relative gain of the input by -12dB to +12dB.

This lets you adjust your inputs so they sound the same volume when you switch between inputs.

Analogue input

For the analogue input A1 there are additional A1 OR PHONO and AUTO-SENSE options:

A1 OR PHONO: Select A1 (the default) for a line-level analogue input, or PHONO for a Moving Magnet phono cartridge.

AUTO-SENSE: can be set to OFF to disable auto-sense, or WAKE+SELECT to automatically bring the Allt-i-Ett out of standby and select the input if audio starts playing on it.

Digital inputs D2, D3, and D4

For the digital inputs there is an additional AUTO-SENSE option:

AUTO-SENSE: can be set to OFF to disable auto-sense, or WAKE+SELECT to automatically bring the Allt-i-Ett out of standby and select the input if audio starts playing on it.

eARC input

For the eARC input there is an additional CEC SETTINGS option that displays the CEC SETTINGS menu:

CEC (Consumer Electronics Control) allows the TV to control the Allt-i-Ett volume, and bring it out of standby.

HDMI CEC: Set to ON to use CEC. If set to ON the following settings allow you to select which features are active:

FOLLOW POWER-ON FROM TV: Brings the Allt-i-Ett out of standby when the TV is turned on.

FOLLOW POWER-OFF FROM TV: Puts the Allt-i-Ett in standby when the TV is turned off.

FOLLOW SOURCE SWITCH: Selects the eARC source on the Allt-i-Ett when the TV is turned on. 

DAB input

For the DAB input there are additional STEREO OR MONO and DAB DLS options:

STEREO OR MONO: Allows you to set the DAB radio to mono if weak reception is causing noise on stereo broadcasts.

DAB DLS (Dynamic Label Segment) controls whether or not programme information is displayed for stations on the Information Display.

FM input

For the FM input there are additional STEREO OR MONO, FM DLS, and FM COUNTRY options:

STEREO OR MONO: Allows you to set the FM radio to mono if weak reception is causing noise on stereo broadcasts.

FM RDS: (Radio Data System) controls whether or not the station, song title, and artist is displayed for stations on the Information Display.

FM COUNTRY: Allows you to specify whether the country is EU, USA, or JAPAN.

STREAM input

There are no additional settings.

GENERAL SETTINGS menu

The GENERAL SETTINGS menu allows you to configure the general features of the Allt-i-Ett, and restart or reset the Allt-i-Ett.

DISPLAY AND AMBIENT LIGHT

Allows you to set the brightness of the display and Touch Control to one of the options: OFF, MEDIUM, or HIGH (the default).

If you choose OFF, touch the Touch Control to light the display for four seconds.

AUTO-DIM

Allows you to choose the delay for dimming the front-panel display after no user interaction, between: AFTER 1 MINUTE, AFTER 5 MINUTES, AFTER 10 MINUTES (default), or NEVER DIM.

STANDBY MODE

Can be set to ECO to reduce the standby consumption to less than 0.5W, but only allows the Allt-i-Ett to wake from the analogue and digital inputs, or NORMAL which also allows the Allt-i-Ett to wake from streaming and the PC/MAC input.

AUTO-STANDBY

Automatically switches the Allt-i-Ett to standby if there is no user interaction or audio from the current source for a specified delay. Select one of the options AFTER 10 MINUTES (default), AFTER 20 MINUTES, or NEVER.

DISPLAY MODE

Specifies the position of the Information Display. Select DISPLAY DOWN to leave the display down, DISPLAY UP to position the display vertical, or DISPLAY SET POSITION to leave the display at the position you’ve set.

You can adjust the position of the Information Display using the  or buttons on the PRISMA remote.

TIME ZONE

Allows you to specify how the Allt-i-Ett displays the current time. Select 24-HOUR TIME to display the time in 24-hour format. Select SET AUTOMATICALLY to set the time from the network connection, or unset it to specify the time and time zone manually on the Touch Display.

SYSTEM REBOOT

Restarts the Allt-i-Ett, retaining your settings.

FACTORY RESET

Resets the Allt-i-Ett to the factory default settings.

You are prompted to confirm. Select YES to proceed or NO to cancel.

WiFi SETUP menu

Allows you to configure the Wi-Fi or Ethernet connection.

Wi-Fi

Displays a list of accessible Wi-Fi networks. Touch the one you want to connect to and enter the password.

Note: This should be the main Wi-Fi network that your other devices are connected to (not a guest network).

Ethernet

Ethernet configuration: Allows you to select DHCP (the default) or Static IP.

The following settings can be viewed or changed:

• Device MAC address
• IP address
• Subnet mask
• Gateway
• DNS 1 and 2
• IPv6 addresses

INFO menu

Displays information about the software on your Allt-i-Ett.

SOFTWARE VERSIONS: Shows the version number of each component of the Allt-i-Ett software.

Direct inputs

HDMI eARC/CEC: stereo PCM up to 24/48 kHz

2 x optical digital inputs: up to 32/192 kHz

1 x coax digital input: up to 32/192 kHz

1 x stereo pair analogue or MM phono input, with ground lug

FM radio

DAB+ radio

1 x USB A input

• File types supported: .aac, .aif, .aiff, .dsf, .dff, .m4a, .mp3/.mp4, .alac, .flac, .wav, .ape, .wma, .ogg
• Resolution: PCM up to 768KHz 32bits, DSD up to DSD512
• File system supported: FAT32, exFAT, NTFS
• Drive capacity: up to 2TB with FAT32

Streaming

WLAN – WiFi6:

• 2.4G 802.11b, 802.11g, 802.11gn, 802.11ax
• 5G 802.11a, 802.11an, 802.11ac, 802.11ax

LAN – 10/100Mbps, with dual sockets: 1 x in; 1 x out

Prisma

• Radio: (MP3 default) 
• Qobuz: up to 24/192 kHz
• TIDAL MAX: up to 24/192 kHz
• NAS: PCM up to 768KHz 32bits; DSD up to DSD512

Bluetooth

• Versions: 5.0,  A2DP: 1.3, AVRCP: 1.6
• Receiver codec support: SBC, AAC, AptX, AptX-HD
• Transmitter, for headphone connection: SBC, AptX

AirPlay2

Qobuz Connect

Tidal Connect

Spotify Connect

Analogue outputs

3.5mm headphone: 32Ω at 30mW output

Subwoofer output: with bass management

Speaker Array

• 6 x 4-inch woofers
• 2 x 4-inch midrange drivers
• 2 x 0.75-inch waveguide tweeters 
• 300W amplifier peak power

DSP 

• Position options: Free Standing, Near Wall, Corner
• Auto Room EQ
• 11-band graphic equaliser
• BACCH spatial audio 

General

Interface

1 x fixed touch-screen display

1 x motorised display

Antenna

1 x FM/DAB+ antenna socket

Control

1 x Trigger out

1 x 3.5mm IR out

1 x 3.5mm service port

Power consumption

Multi-voltage support (100-120V, 220-240V):

• Operating 18 W
• Normal Standby 5W remote control or app power on
• ECO Standby >0,5 W manual power on from unit
• Continuous Power 300 W

Dimensions 

690 x 303 x 150mm (WxDxH) (230mm H with display fully raised)

Weight

16kg

Specifications subject to change

These instructions help you get the best possible sound from your Allt-i-Ett.

Phase

The phase of the AC supply can make a significant difference to the sound.

Use the Polarity Pen supplied with the Allt-i-Ett to verify which pin is live on your AC power cable.

Ensure that the live pin of the AC power cable is connected to the right-hand pin of the power connector, viewed from the back panel:

Burn-in

Your Allt-i-Ett will start to sound best after an initial burn-in of approximately 24 hours.

You will notice a further smaller improvement in sound quality for at least another 3 days’ playing.

Trigger

The Trigger output allows the Allt-i-Ett to switch on other devices, such as a subwoofer.

To connect the trigger cable

The supplied trigger cable ensures that the subwoofer switches on, or to standby, when you operate the  button on the Main Controls of the Allt-i-Ett.

• Connect the Trigger cable from the Allt-i-Ett TRIG OUT to the subwoofer TRIG IN.

Factory reset

You can do a factory reset of the Allt-i-Ett from the Prisma app, or from the GENERAL SETTINGS menu; see General settings menu.

Network troubleshooting

Information Display

The icon at top left of the Information Display indicates the type of network connection:

indicates that you are connected by Ethernet.

  indicates that you are connected by Wi-Fi.

Network status

The CON indicator on the back panel indicates the network status:

ON Indicates the Allt-i-Ett is connected to a network

OFF Indicates no connection to a network

Flashing indicates that the network is not configured correctly. Check the Ethernet settings on the WIFI SETUP menu; see Configuring the Settings – Ethernet.

Spotify Connect

The Spotify Software is subject to third party licenses found here: 

https://beta.developer.spotify.com/private-documentation/esdk-third_party_licenses