Configuring the settings
Using the settings menus
You can view and change the DD15 settings from the front panel, remote control, or using the Prisma app.
To display the settings menu
- Press
and
on the front panel simultaneously, or the MENU button on the remote control.
The settings menu is displayed:
To step between settings
- Press the
or
buttons on the front panel, or the
or
buttons on the remote control.
The current setting is shown highlighted.
To change a setting
- Press and hold the
button on the front panel, or press the SELECT button on the remote control.
The current value is shown highlighted.
- Press the
or
buttons on the front panel, or the
or
buttons on the remote control, to change the value of the setting.
As you change it the new value is shown in the menu.
- Press and hold the
button on the front panel, or press the SELECT button on the remote control, to save the value you have set.
To navigate back or cancel editing a setting
- Press and hold the
button on the front panel, or press the
button on the remote control.
To exit from the settings menu
- Press
and
on the front panel simultaneously, or press the MENU button on the remote control.
PLAYBACK SETTINGS
The PLAYBACK SETTINGS menu allows you to customise the auto resume feature:
AUTO RESUME
Specifies whether disc playback will start from the previously saved point.
Choose OFF to play from the beginning or ON to play from the previously saved point.
GENERAL SETTINGS
The GENERAL SETTINGS menu allows you to configure the general operation of the DD15:
FRONT PANEL
Choose LOCKED to lock the front panel buttons and knobs, or UNLOCKED (default) to use them.
To unlock the front panel buttons use the remote control to select this menu, or remove power from the DD15 for a few seconds.
AUTO-DIM
Allows you to choose the delay for dimming the display after no user interaction, between: AFTER 1MIN, AFTER 5MIN, AFTER 10MIN (default), or OFF.
STANDBY SETTINGS
Displays the STANDBY SETTINGS menu to allow you to specify the standby settings.
STANDBY MODE can be set to ECO to reduce the standby consumption to less than 0.5W, or NORMAL which allows the DD15 to wake from streaming inputs.
AUTO-STANDBY automatically switches the DD15 to standby if there is no user interaction or audio from the current source for a specified delay: AFTER 10MIN, AFTER 15MIN, AFTER 20MIN (default), or OFF.
FACTORY RESET
Resets the DD15 to the factory default settings.
You are prompted to confirm. Select YES to proceed or NO to cancel.
FIRMWARE VERSIONS
Displays the FIRMWARE VERSIONS menu to allow you to view the versions of firmware installed.