SC15 Prisma MK2 System Control Center User Guide

  • Contents

    • Getting started

    1 Unpack the SC15 Prisma MK2

    Your SC15 Prisma MK2 is supplied with:

    • The Chromecast built-in Quick Start Guide
    • Mains cable
    • IR cable
    • Trigger cable
    • Antennas for Bluetooth and Wi-Fi
    • C25 remote control with batteries
    • AC Polarity Pen

    If any of these items are missing please contact your supplier. We recommend you retain the packaging in case you need to transport the unit at a later date.

    Note that the SC15 is supplied with a protective film on the display glass. Remove the film for a clearer whiter display.

    2 Connect outputs

    Analogue outputs

    The SC15 provides a fixed-level or variable-level analogue output on the ANALOG OUT output on RCA connectors, to allow you to connect to active speakers or an analogue recorder.

    Digital output

    The SC15 also provides a coax digital output on an RCA connector.

    3 Connect inputs

    You can connect up to two analogue sources and up to four digital sources to the inputs on the back panel.

    Analogue sources

    • Connect analogue sources to A1 and A2, using high quality RCA cables.

    Digital sources

    • Connect digital optical sources to the digital optical inputs D3 to D5 using optical cables.
    • Connect a digital coax source to D6, using a digital RCA cable.

    You can also connect a USB flash drive to the USB-A input, and a PC or Mac to the USB-B input to use the SC15 as an audio output device for your computer. For more information see Playing music from a drive or music server.

    Streaming

    You can stream music wirelessly to the SC15 from a mobile phone, tablet, computer, or other Prisma product via Bluetooth or Wi-Fi, or via a wired Ethernet connection. For more information see Streaming music from a phone, tablet, or PC.

    4 Connect the antennae

    • Connect the two antennae supplied with the SC15 Prisma to the ANT 1 and ANT 2 sockets on the back panel, and position the two antennae at a slight angle from the vertical.

    The antennae are used for Bluetooth and Wi-Fi connectivity.

    5 Connect the Ethernet cable

    For best results we recommend connecting the SC15 Prisma MK2 to your network using an Ethernet cable.

    Alternatively, if it’s more convenient you can connect via Wi-Fi, in which case you can skip this step.

    • Connect the cable between your router or switch and the LAN port on the back panel of the SC15 Prisma.

    6 Connect power

    • Plug one end of the mains cable supplied with the SC15 into the power connector on the back panel, and connect the other end to a wall socket.

    If this cable is not suitable for your power outlets please contact your supplier for an alternative cable.

    Note: See Phase for information about getting the best sound from your SC15.

    WARNING: Always disconnect the SC15 from the mains power before connecting or disconnecting any cables.

    • Switch on the SC15, using the switch on the back panel.

    To switch on from standby

    • Press on the front panel or remote control.

    The display shows:

    PRIMARE

    7 Connect to a network

    The first time you start up the SC15 Prisma MK2 you will be prompted to specify how you want to connect to the network:

    For best results we recommend connecting via cable.

    You can change this setting at any time using Network mode on the Network menu; see Network mode.

    Connecting via an Ethernet cable

    To connect via an Ethernet cable:

    • Select Cable.

    Using an Ethernet cable connection provides immediate access to your network, and the front-panel display will show LAN in its lower right corner to indicate that a connection is established.

    If the front-panel display shows Setup mode make sure your Ethernet cable is connected and it has a network connection.

    To take advantage of Chromecast built-in related features and functionality – such as casting, voice control, and multi-room/multi-zone configuration and control – you must configure the SC15 using the Google Home app, with a Google account.

    • Make sure Bluetooth and Wi-Fi are enabled on your mobile device.
    • Install the free Google Home app on your mobile device.
    • Open the Google Home app and follow the instructions for setting up the SC15 Prisma MK2 on your network in the Chromecast Built-in Quick Start Guide, or the brief description below:

    The Google Home app will display Set up SC15 Prisma.

    • Click SET UP and follow the instructions.

    The front-panel display will show:

    Configure network

    A test tone will be played and you will be prompted to select a name for your SC15.

    If you cannot hear the test sound you may need to increase the volume on your amplifier.

    • Enter an appropriate name.

    Once you have configured the SC15 using the Google Home app the Configure network message will disappear from the front-panel display.

    You will now be able to stream music to your SC15.

    To disconnect from the Ethernet network

    • Remove the Ethernet cable.

    Connecting via Wi-Fi

    To connect via Wi-Fi:

    • Select WiFi.

    When the SC15 is ready to be set up via Wi-Fi the front-panel display will show:

    Setup mode

    You can connect to Wi-Fi either by using the iOS AirPlay speaker setup, the Android Prisma app, or the Google Home app.

    To take advantage of Chromecast built-in related features and functionality – such as casting, voice control, and multi-room/multi-zone configuration and control – you must configure the SC15 using the Google Home app, with a Google account.

    AirPlay speaker setup

    • Go to the Wi-Fi menu under Settings on your iOS
      device.
    • Select the Prisma model you want to set up under SET UP NEW AIRPLAY SPEAKER at the bottom of the list.
    • Select the Wi-Fi network you want your SC15 Prisma MK2 to connect to and select Next.
    • Follow the instructions on the screen to complete the setup.

    Prisma Android app

    • Open the Android Prisma app and follow the instructions at the link in the discovery page.

    Google Home app

    • Make sure Bluetooth and Wi-Fi are enabled on your mobile device.
    • Install the free Google Home app on your mobile device.
    • Open the Google Home app and follow the instructions for setting up the SC15 Prisma MK2 on your network in the Chromecast Built-in Quick Start Guide, or the brief description below:

    The Google Home app will display Set up SC15 Prisma.

    • Click SET UP and follow the instructions.

    The front-panel display will show:

    Configure network

    A test tone will be played and you will be prompted to select a name for your SC15 Prisma MK2.

    If you cannot hear the test sound you may need to increase the volume on your amplifier.

    • Enter an appropriate name.
    • Select the Wi-Fi network your SC15 should connect to.

      Once you have configured the SC15 using the Google Home app the Configure network message will disappear from the front-panel display.

      You will now be able to stream music to your SC15.

      To disconnect from the Wi-Fi network

      Either:

      • Select Wi-Fi settings for the SC15 Prisma MK2 in the Google Home app.
      • Select Forget this network.

      Or:

      8 Download the Prisma app

      To view and change the SC15 Prisma MK2 settings you need the Primare Prisma app. For iOS devices this is available for free download from the Apple App Store. For Android devices this is available for free download from the Google Play Store.

      In either case search for Primare Prisma to find the app.

       

      Printing or saving as PDF

      You can print an on-line Primare user guide from your web browser, to provide you with a permanent copy to refer to away from your computer.

      Alternatively, you can save a user guide as PDF files, to refer to when are you not connected to the internet.

      To do so, simply choose Print, or Print followed by Save as PDF, from your browser’s File menu.

      For the specific procedure for each of the most popular web browsers see How do I print or save a PDF copy of the on-user guides?.

      Translate

      You can use Google Translate to translate the contents of the Primare website. To do that, select the language you would like to translate into in the list below.

      Please bear in mind, since the Google Translate is an automatically generated translation, we do not take any responsibility for errors in the text.