I35 Prisma Integrated Amplifier User Guide

  • Contents

    • Getting started

    1 Unpack the I35

    Your I35 is supplied with:

    • The Chromecast built-in Quick Start Guide
    • Mains cable
    • IR cable
    • Trigger cable
    • Antennas for Bluetooth and Wi-Fi
    • C25 remote control with batteries
    • AC Polarity Pen

    If any of these items are missing please contact your supplier. We recommend you retain the packaging in case you need to transport the unit at a later date.

    Note that the I35 is supplied with a protective film on the display glass. Remove the film for a clearer whiter display.

    2 Connect speakers

    The I35 is designed to be connected directly to a pair of loudspeakers.

    • Connect the red wire from each speaker to the red terminal marked + and the black wire from each speaker to the black terminal marked –. 

    The terminals can accept speaker cables terminated with spade terminals, banana plugs, or bare wires.

    To connect bare wires unscrew the terminal, pass the bare wire through the hole in the terminal bolt, and clamp the wire in place by screwing the terminal back down hand tight.

    Analogue outputs

    The I35 provides fixed-level and variable-level analogue outputs on the LINE and PRE outputs on RCA connectors, to allow you to connect to active speakers or an analogue recorder.

    Digital output

    The I35 also provides a coax digital output on an RCA connector.

    3 Connect inputs

    You can connect up to two balanced sources, up to three unbalanced sources, and up to six digital sources to the inputs on the back panel.

    Balanced inputs

    • Connect balanced sources, such as the Primare CD35 CD player, to balanced inputs A1 and A2 using high quality XLR cables.

    Unbalanced inputs

    • Connect unbalanced sources to the unbalanced inputs A3, A4, and A5 using high quality RCA cables.

    Digital inputs

    • Connect digital optical sources to the digital optical inputs D6 to D9 using optical cables.
    • Connect digital coax sources to the digital coax inputs D10 and D11 using digital RCA cables.

    You can also connect a USB flash drive to the USB-A input, and a PC or Mac to the USB-B input to use the I35 as an audio output device for your computer. For more information see Playing music from a drive or music server.

    Streaming

    You can also stream music wirelessly to the I35 from a mobile phone, tablet, computer, or other Prisma product via Bluetooth or Wi-Fi, or via a wired Ethernet connection. For more information see Streaming music from a phone, tablet, or PC.

    4 Connect the antennae

    • Connect the two antennae supplied with the I35 to the ANT 1 and ANT 2 sockets on the back panel, and position the two antennae at a slight angle from the vertical.

    One antenna is for Bluetooth connectivity, and the other one is for Wi-Fi connectivity.

    5 Connect power

    Plug one end of the mains cable supplied with the I35 into the power connector on the back panel, and connect the other end to a wall socket.

    If this cable is not suitable for your power outlets please contact your supplier for an alternative cable.

    Note: See Phase for information about getting the best sound from your I35.

    WARNING: Always disconnect the I35 from the mains power before connecting or disconnecting any cables.

    • Switch on the I35, using the switch on the back panel.

    To switch on from standby

    • Press  on the front panel or remote control.

    The display shows:

    6 Connect to a network

    For best results we recommend connecting via cable.

    To connect via an Ethernet cable

    • Connect an Ethernet cable between your router and the LAN socket on the back panel of the I35.

    When the I35 is ready to set up the network the display will show:

    • Install the free Google Home app on your mobile device.
    • Run Google Home.

    It will display New device found, I35.

    • Click SET UP and follow the instructions.

    After playing a test sound you will be prompted to select a name for your I35.

    You will now be able to stream music to your I35.

    To disconnect from the Ethernet network

    • Remove the Ethernet cable.

    To connect via Wi-Fi

    When the I35 is ready to set up the network the display will show:

    • Make sure Bluetooth and Wi-Fi are enabled on your mobile device.
    • Install the free Google Home app on your mobile device.
    • Run Google Home.

    It will display New device found, I35.

    • Click SET UP and follow the instructions.

    After playing a test sound you will be prompted to connect to your home Wi-Fi network.

    • Select your Wi-Fi network and enter the password.

    You will now be able to stream music to your I35.

    To disconnect from the Wi-Fi network

    Either:

    • Select Wi-Fi settings for the I35 in the Google Home app.
    • Select Forget this network.

    Or:

     

    Printing or saving as PDF

    You can print an on-line Primare user guide from your web browser, to provide you with a permanent copy to refer to away from your computer.

    Alternatively, you can save a user guide as PDF files, to refer to when are you not connected to the internet.

    To do so, simply choose Print, or Print followed by Save as PDF, from your browser’s File menu.

    For the specific procedure for each of the most popular web browsers see How do I print or save a PDF copy of the on-user guides?.

    Translate

    You can use Google Translate to translate the contents of the Primare website. To do that, select the language you would like to translate into in the list below.

    Please bear in mind, since the Google Translate is an automatically generated translation, we do not take any responsibility for errors in the text.