CD35 Compact Disc Player User Guide

  • Contents

    • Configuring the settings

    Using the settings menus

    You can view and change the CD35 settings from the front panel, remote control, or using the Prisma app.

    To display the settings menu

    • Press  and  on the front panel simultaneously, or the MENU button on the remote control.

    The settings menu is displayed:

    To step between settings

    • Press the  or  buttons on the front panel, or the  or  buttons on the remote control.

    The current setting is shown highlighted.

    To change a setting

    • Press and hold the  button on the front panel, or press the SELECT button on the remote control.

    The current value is shown highlighted.

    • Press the  or  buttons on the front panel, or the  or  buttons on the remote control, to change the value of the setting.

    As you change it the new value is shown in the menu.

    • Press and hold the  button on the front panel, or press the SELECT button on the remote control, to save the value you have set.

    To navigate back or cancel editing a setting

    • Press and hold the  button on the front panel, or press the  button on the remote control.

    To exit from the settings menu

    • Press  and  on the front panel simultaneously, or press the MENU button on the remote control.

    PLAYBACK SETTINGS

    The PLAYBACK SETTINGS menu allows you to customise the auto resume feature:

    AUTO RESUME

    Specifies whether disc playback will start from the previously saved point.

    Choose OFF to play from the beginning or ON to play from the previously saved point.

    GENERAL SETTINGS

    The GENERAL SETTINGS menu allows you to configure the general operation of the CD35:

    FRONT PANEL

    Choose LOCKED to lock the front panel buttons and knobs, or UNLOCKED (default) to use them.

    To unlock the front panel buttons use the remote control to select this menu, or remove power from the CD35 for a few seconds.

    AUTO-DIM

    Allows you to choose the delay for dimming the display after no user interaction, between: AFTER 1MIN, AFTER 5MIN, AFTER 10MIN (default), or OFF.

    LED BRIGHTNESS

    Displays the LED BRIGHTNESS menu to allow you to set the display brightness to between 1 and 5 for each display dimming level:

    DIM HIGH (default 3), DIM MID (default 2), DIM LOW (default 1), or DIM OFF (default 1).

    STANDBY SETTINGS

    Displays the STANDBY SETTINGS menu to allow you to specify the standby settings.

    AUTO-STANDBY automatically switches the CD35 to standby if there is no user interaction or audio from the current source for a specified delay: AFTER 10MIN, AFTER 15MIN, AFTER 20MIN (default), or OFF.

    FACTORY RESET

    Resets the CD35 to the factory default settings.

    You are prompted to confirm. Select YES to proceed or NO to cancel.

    FIRMWARE VERSIONS

    Displays the FIRMWARE VERSIONS menu to allow you to view the versions of firmware installed.

     

    Printing or saving as PDF

    You can print an on-line Primare user guide from your web browser, to provide you with a permanent copy to refer to away from your computer.

    Alternatively, you can save a user guide as PDF files, to refer to when are you not connected to the internet.

    To do so, simply choose Print, or Print followed by Save as PDF, from your browser’s File menu.

    For the specific procedure for each of the most popular web browsers see How do I print or save a PDF copy of the on-user guides?.

    Translate

    You can use Google Translate to translate the contents of the Primare website. To do that, select the language you would like to translate into in the list below.

    Please bear in mind, since the Google Translate is an automatically generated translation, we do not take any responsibility for errors in the text.