Technical specification
Amplifier module
Hypex NCore500
Power supply
Primare APFC
Speaker outputs
8 outputs with each pair bridgeable.
Output power at 1kHz:
- 400 watts at 2Ω
- 300 watts at 4Ω
- 150 watts at 8Ω
Output power bridged at 1kHz:
- 450 watts at 2Ω
- 750 watts at 4Ω
- 740 watts at 8Ω
Analogue inputs
Inputs per channel:
1 x RCA (L&R)
1 x XLR (L&R)
Input impedance
RCA: 15kΩ
XLR: 36kΩ
Input sensitivity
RCA 150W 8Ω = 1.7V
XLR 150W 8Ω = 3.4V
Performance
Gain
RCA 26dB
XLR 20dB
Frequency response
20Hz – 20kHz +0.2/-0.5dB
Distortion
THD + N: < 0.005%, 20Hz – 20kHz
Signal to noise
>115 dB
General
Control
Trigger in/out
RS232
Auto Sense: on/off
Input: RCA/XLR
Gain: +6db bridge mode only
Power Consumption
Off: 0W
Standby: <0.5W
Operating: <65W
Fuses
- 100V-200V: T20AL/250V
- 230V-240V: T10AL/250V
Internal on printed-circuit board. Should only be replaced by a trained technician.
Dimensions
430 x 400 x 145 mm (w x d x h) with knobs and connectors
430 x 382 x 145 mm (w x d x h) without knobs and connectors
Weight
15 kg
Colour
Black or titanium
Note: features and specifications are preliminary and subject to change.